How to Stop Feedback on a Wireless Mic in 4 Easy Steps
Wireless mic feedback can ruin an event. Four easy fixes: lower the volume, aim the speakers away, use a directional mic and mute unused mics.
An event held in a large room with a sizable audience needs a mic. The device makes the voice louder so that it reaches every corner of the room. Often, though, a problem appears: feedback, a loud squeal or howl. A Shure wireless mic that squeals like this can be fixed in a few effective ways. Here are the easy ones!
Easy Ways to Fix Wireless Mic Feedback
- Turn the Mic Volume Down
Usually, to make a voice easier to hear, the volume is set higher. The side effect is a more sensitive microphone, so every sound around it enters the amplifier very easily. That includes not just the people nearby but also sound coming from the speakers. So you should turn the volume down so that feedback no longer disrupts the event. This first point is the easiest one to do.
- Adjust the Speaker Direction
A mic exists to make a voice louder and easier to hear, but it must be backed by loudspeakers. A Shure wireless mic has to be connected to speakers so that the incoming sound can reach the audience. What matters is where the speakers sit during the event. Avoid placing them facing the sound source directly, so no feedback builds up. Adjust the position until the piercing sound goes away.
- Choose a Directional Mic
Microphones differ in strengths and abilities, so choose one to fit the needs of your event. To avoid feedback or piercing squeals, you can choose a directional mic. The main function of this microphone is that it does not pick up sound from anywhere except the sound source. That way, the sound around it does not enter the speaker, which could cause a high-pitched squeal, commonly called feedback.
- Turn Off Unused Mics
An event usually uses more than one microphone because there are quite a few speakers. That raises the chance of a high-pitched squeal, since more than one Shure wireless mic is active. The effective fix is simply to switch off any microphone that is not in use. The signal from one mic will not interfere with the others, so the sound that is picked up is more focused and does not spoil your event.
Holding an important event takes more than a concept and a program; it also takes supporting equipment. Using a mic as a loudspeaker also means watching out for feedback. These four effective methods can make feedback go away quickly. You should also use a Shure wireless mic from Goshen, because the quality is guaranteed, the products are genuine and buying is easy.
